• Pelham Sprenger Max-Control Bit
zoom_in
Pelham Sprenger Max-Control Bit

Pelham Sprenger Max-Control Bit

SPRENGER

Ref : 642700

Description Size guide
Mouth size
expand_more
Quantity
€91.25
Tax included

favorite_borderAdd to my wishlist

Description

With its self-locking mouthpieces, the Pelham Sprenger Max-Control bit is ideal as a dressage or corrective bit.

With its locking system, its double jointed blocks beyond a certain angle and the double breakaway bit then acts as a straight bit.

As soon as the horse gives way and the tension in the reins is reduced, the double breakaway is articulated again.

The Pelham Sprenger Max-Control bit is perfectly suited for a horse with strength that goes against the hand.

This bit with its short shanks and curb chain acts simultaneously on the tongue, neck and lower jaw.

It can be used with pelham rings or 2 pairs of reins for more precision.

The curb chain must be placed flat, in contact and allow a 45° angle between the shanks and the axis of the mouth. 

The use of a brace protector is recommended to protect the sensitive bone of the lower jaw. 

The Pelham Sprenger Max-Control bit is made of stainless steel and is sold with the curb chain.

mouthpieces : 16 mm 

Width: 125 mm

                       

Composition 

Stainless Steel 

Maintenance tips

Rinse with clear water after each use until no residue remains. Do not use if the jaws are damaged, rusted, etc.

Size guide

The size of the mouth is a major parameter in the choice of the bit.

A bit at the right size contributes to the comfort of the horse.

The wrong size could hurt him.

Once the bit is in the mouth, there should be a few millimetres between the corner of the lips and the ring to avoid injury.
Indicative measurement.

Bits and bridle

Horse type Bits Size (mm) Bits Size
Pony A (Shetland) 85 mm 3 1⁄8
Pony A (Shetland) 90 mm 3 1⁄2
Pony A (Shetland) 95 mm 3 5⁄8
Pony A (Shetland) 100 mm 4
Pony B 105 mm 4 1⁄4
Pony B 110 mm 4 1⁄8
Pony C or D 115 mm 4 3⁄8
Pony C or D 120 mm 4 1⁄2
Pur-sang or Horse 125 mm 4 5⁄8
Horse 130 mm 5
Horse 135 mm 5 1⁄4
Tall Horse 140 mm 5 1⁄2
Tall Horse 145 mm 5 5⁄8
Draft Horse 150 mm 6
Draft Horse 155 mm 6 1⁄8
Draft Horse 160 mm 6 1⁄4
Draft Horse 165 mm 6 1⁄2

You might also like

Shipping and return policies

Shipping

Products without special conditions :

  • In Europe : The price varies according to the weight of the order. It will be indicated during its validation.
    The delivery time is between 4 to 10 working days. 
    To receive an order in Switzerland, please log on to www.padd.ch.
    To receive an order in France, please log on to www.padd.fr.
  • International : The price varies according to the weight of the order. It will be indicated during its validation.
    The delivery time is between 5 to 21 working days.

Products with special conditions :

This product is heavy and/or bulky. It is subject to specific shipping charge, a quotation will be proposed to you and sent by e-mail to your address.

  • In Europe : The specific shipping costs of this product will be added to the delivery rate of your order. No extra delay for delivery.
  • International : The specific shipping costs of this product will be added to the delivery rate of your order.
    It will be indicated during the validation of your basket. The delivery time remains from 5 to 21 working days.

Return

Good news !

You have 365 days to return a product via the website.
Unless we have committed an error, the return shipping cost are your responsibility.
Once the return has been received and accepted, we will reimburse you within 15 days.
For more details, click here.